Select brand, series, model code and model and choose the Supersprint Exhaust Systems

AUDI A7 RS7 Quattro 4.0T (560 Hp) 2013 ->

100% Stainless steel system

Changing the exhaust is a very good upgrade in a tuning program. It's one of the most important aftermarket parts, and if you're looking for a performance increase, with a power and torque gain, exhaust mods are always recommended.

The Supersprint exhaust system for AUDI A6 RS7 Quattro 4.0T (560 Hp) 2013 –› is composed by:

1) Front section oversized Ø65mm which includes:
- Turbo downpipes with HJS high flow metallic cats or cat-less downpipes (n. 771321 + 771341 or 771311), separately installable.
- Connecting pipe kit right + left (n. 767731)
- Front pipes kit right - left (n. 761312)
Connecting pipes and front pipes can be fitted separately to replace the OEM front silencers..
To fit with OEM centre section please request outlets diameter reduction to 60mm.

2) Front section oversized Ø70mm, alternative to the previous one, to be fitted as a kit, which includes:
- Turbo downpipes with HJS high flow metallic cats or cat-less downpipes (n. 771621 + 771641 o 771611)
- Connecting pipe kit right + left (n. 761631)
- Front pipes kit right - left (n. 761612)
Because of the larger bore these parts cannot be combined with the OEM downpipes or front pipes.
This setup is still compatible with both the OEM or the Supersprint centre section (see 3 below)
To fit with OEM centre section please request outlets diameter reduction to 60mm.

3) Centre / Rear section, compatible with both the front sections above or the OEM one, which includes:
- Centre exhaust (n. 769603) or central "H-Pipe" kit (769613) or central pipe kit "Racing" (n. 769623)
- Rear exhaust right - left for OEM end pipes (n. 771304 / n. 771334)
The look of the car remains untouched.

The Supersprint system is completely modular to satisfy any need in terms of sound or performance.
We recommend the 70mm front section for tuned cars, with ECU modifications.
The 65mm downpipes are a perfect plug&play upgrade, while they can't match the gains of the 70mm setup.
It's possible to keep the OEM rear mufflers equipped with electrical bypass valves, coupled with the Supersprint front and/or centre sections.
 
If you want to increase the sound of the car without replacing the OEM cats and keeping the stock mufflers to maintain the bypass valve functionality, we recommend the following setup: 767731 + 771312 + 779613
 
 
Because of the complexity of this exhaust system we recommend to ask for advice to our experts.
With E.E.C. homologationWith E.E.C. homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaustComponent E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converterCompatible with the OEM catalytic converter
For racing use onlyFor racing use only
Discontinued Product. Available while stock lastsDiscontinued Product. Available while stock lasts
Threaded bung for oxygen sensor providedThreaded bung for oxygen sensor provided
Oval endpipeOval endpipe
Twin oval endpipeTwin oval endpipe
Flat oval endpipeFlat oval endpipe
With certificate of authenticity - Compliance to sound regulationsWith certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust designWith certificate of conformity for classic exhaust design
Sigla.com - Internet Partner