促销 {{priceVariant.promotionFrom}} 来自 {{priceVariant.promotionTo}} Club Promotion
{{l}}
编码:{{codeProduct}}
数量: {{quantityUpdated | quantityZero:prodNonDisp:resources.quantityZero}}
{{resources.infoQuantity}}
最小订购数量 {{quantityMin}}
最大可用数量: {{quantityMax}}
分享:
Turbo downpipe Supersprint for OEM front section

It's a plug&play component that replaces the OEM downpipe and the integrated ceramic catalytic converter.

The removal of the stock cat placed close to the turbocharger drastically reduces the backpressure.
Consequently it increases the performance of the engine and reducese the temperature in the engine bay.
It's a recommended upgrade, especially in case of a ECU tune.

To fit this part with the OEM front section is necessary to cut the pipe in the correct spot.
The Supersprint pipe will slide on top of it and it's fitted with bolts to tight it up.
Muffler sealing paste on the connection is recommended.
Welding is optional but recommended to avoid any leak.
See picture below.

It's fitted with two O2 sensor bung.

Because the secondary sensor will read wrong values once the OEM cat is removed, it's necessary to tune the ECU (turning off either the second sensor or the specific error) or to use a sensor cheater (also known as emulator or microcat).

I have read the privacy policy and I consent to data processing for the indicated purposes*

I consent to receiving commercial communications and offers from SuperSprint

分享:
Sigla.com - Internet Partner