Select brand, series, model code and model and choose the Supersprint Exhaust Systems

AUDI A3 8P Sportback QUATTRO 3.2i VR6 (250 Hp) '04 ->

aud14
Supersprint is the performance #exhaust specialist for all of the VAG-VR6 cylinder models; the 2004-2009 #AUDI #A3 #Sportback 3.2i Quattro is no exception.

We have developed long tube headers for each model and engine version, since the arrival of the first Golf III 2.8 VR6 in the early '90s.

Always aiming at extracting the most hp and torque, our R&D team has kept busy during the years that followed, redesigning, upgrading our original concept, as the VW/Audi Factory made the engine grow larger in displacement, becoming more powerful with each step.

On the 3.2l engine of the A3 Sportback Quattro, we learned that horsepower improvements not come easy.

Yet we managed to squeeze substantial performance gains, by carefully designing a new exhaust, up from scratch.

The Supersprint stainless steel full system guarantees a healthy increase in low to midrange torque, and in peak Hp as well.

Also, the sound is a gorgeous, becoming deep, throaty; the trademark note the VR6 has become famous for; but without any unwanted droning at cruising speeds, or when or accelerating up from the rpm basement.

Our full system for the A3 Sportback 3.2i Quattro is the most cost-effective performance addition.

It has proven to be an extremely popular and succesful exhaust setup among the entire A3 community, worldwide.
OEM
Claimed data:
Horsepower 250 Hp at 6300 rev/min
Torque 320 Nm a 2500 rev/min

Actual data:
Horsepower 229,2 Hp at 6495 rev/min
Torque 298,9 Nm a 2800 rev/min.

Download file
Supersprint:
- Manifold 765301
- Metallic catalytic converter Right – Left325702
- Connecting pipe 765311
- Centre exhaust 765303
- Rear exhaust Racing 326505
Actual data:
Horsepower 245,9 Hp at 6305 rev/min
Torque 314,7 Nm at 3420 rev/min.

Download file
Stock Vs Supersprint
Download file
With EEC homologation / Compliant to the EEC N°70/157 standard
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converter
For racing use only
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Oval endpipe
Twin oval endpipe
Flat oval endpipe
With certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
Sigla.com - Internet Partner