Select brand, series, model code and model and choose the Supersprint Exhaust Systems

AUDI R8 Coupé/Roadster 5.2i V10 (525 - 532 Hp) 2009 -> 2012 (with valve)

High performance sport exhaust for Audi R8 V10 5.2 from 2009 to 2012.

100% stainless steel 2xØ70mm

For models with dual oval tips, one for each side, integrated in the rear bumper.

This system replaces the OEM muffler, which include the secondary catalytic converters, with a direct flow system with oversized bore.
The removal of the secondary cats allows a consistent power and sound increase, and a noticeable weight saving, especially if the “race” exhaust is chosen.
No Check Engine Light problems as the primary cats integrated in the headers are not removed and the O2 sensors read the correct values.

For a nice and satisfying sound, not too loud, we recommend the “race” muffler.

The valved exhaust is compatible with the OEM management system, to fit it the pneumatic pipes must be dethatched from the stock system and re-attached to the new one.
The sound is sportier but comfortable in closed mode, and extremely loud and aggressive in open mode.
The R8 doesn’t give the driver the full control of the valves, they always open at a certain rpm level and throttle opening, this may cause excessive loudness in some situations. We do not recommend this system for daily use, especially if it involves high speed driving on the motorway.

The power increase is basically the same for all exhaust versions. 
Claimed data:
Horsepower 525 Hp @ 8000 rpm
Torque 530 Nm @ 6500 rpm

Actual data:
Horsepower 527 Hp @ 7720 rpm
Torque 524,8 Nm @ 6500 rpm
Download pdf chart (486Kb)
- Rear exhaust 768304

Actual data:
Horsepower 548,6 Hp @ 8110 rpm
Torque 539,4 Nm @ 6405 rpm
Download pdf chart (512Kb)
Stock Vs Supersprint
Download pdf chart (361Kb)
With E.E.C. homologationWith E.E.C. homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaustComponent E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converterCompatible with the OEM catalytic converter
For racing use onlyFor racing use only
Discontinued Product. Available while stock lastsDiscontinued Product. Available while stock lasts
Threaded bung for oxygen sensor providedThreaded bung for oxygen sensor provided
Oval endpipeOval endpipe
Twin oval endpipeTwin oval endpipe
Flat oval endpipeFlat oval endpipe
With certificate of authenticity - Compliance to sound regulationsWith certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust designWith certificate of conformity for classic exhaust design - Internet Partner