• BMW M>
  • BMW M3>
  • BMW G80 M3 Competition
Select brand, series, model code and model and choose the Supersprint Exhaust Systems
printable version

BMW G80 M3 Competition (S58 - 510 Hp - models with OPF) 2021 -> (with valve)

aka: Performance sport exhaust for BMW G80 M3 Competition OPF

bmwG801v
Supersprint is proud to offer its complete range of Performance exhausts for the 2022 BMW M4 Convertible; for both the US and the Euro (OPF-equipped) versions.

Our multiple Downpipe-back offerings include a "Twin Pipe" system, and a unique, "J-pipe" (single pipe) system, each providing for distinctive, unique sound harmonics.

We also offer a California-only, exclusive version, which deletes the stock resonators, while keeping the secondary cats in place.

Come think of it, this specific system offers a nice, audible sound improvement, without affecting the emissions even by the slightest amount.

Each of our exhausts are designed to accept the std factory muffler, and the MPE muffler as well, with no modification required for the install.

All of these Supersprint systems are a bolt-on and go application, fitting just perfectly, with no interference to the cross brace, thanks to a proper routing and the narrow-radius mandrel bends of the pipes in this critical area.

No spacers for lowering the brace are needed either.

Speaking in terms of flow, they guarantee the exact same reduction in exhaust back pressure over the stock secondary cat system, as the Supersprint "J-Pipe" is a monsterous 100mm / 4" proprietary design bent pipe section, hydro formed to oval, which equals our 70mm twin pipes in terms of combined cross section.

No less important, the Supersprint J-pipe while being huge in diameter, ensures stock-like ground clearance in all places.
With ECC Homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compliant to the noise regulation 70/157/EEC.
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
Compatible with the OEM catalytic converter
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
Copyright © 2008-2023 Supersprint Srl - Mantova - Italy
Sigla.com - Internet Partner
[Privacy Policy] [Cookies Policy] [Change cookie settings]