Performance sport exhaust for FIAT 500X 1.4T MultiAir, FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018, FIAT, exhaust systems

Select brand, series, model code and model and choose the Supersprint Exhaust Systems

printable version

FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018

100% Stainless steel "Cat.-back" system, Oversize Ø57mm

Centre pipe Cod: 817513

FIAT - FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018 Rear exhaust OO80, performance exhaust systems

Rear exhaust OO80 Cod: 817706

100% Stainless steel "Cat.-back" right - left system, Oversize Ø57mm

Centre pipe Cod: 817513

FIAT - FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018 Rear exhaust Right - Left, performance exhaust systems

Rear exhaust Right - Left Cod: 817504

(For Standard bumper)
To be installed as a kit with 764615 or 816046 or 816056

Rear exhaust Right - Left Cod: 817534

(For "Cross Plus" bumper)
To be installed as a kit with 764615 or 816046 or 816056

FIAT - FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018 Oval endpipe kit Right + Left 145 x 95, performance exhaust systems

€374.00 (taxes not included) Oval endpipe kit Right + Left 145 x 95. Cod: 764615

To be installed as a kit with 817504 or 817534

FIAT - FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018 Endpipe kit Right OO70 - Left OO70, performance exhaust systems

€536.00 (taxes not included) Endpipe kit Right OO70 - Left OO70 Cod: 816046

To be installed as a kit with 817504 or 817534

FIAT - FIAT 500X 1.4T MultiAir (140 Hp) 2014 -> 2018 Endpipe kit Right OO70 - Left OO70 "Gun Metal Grey", performance exhaust systems

€643.00 (taxes not included) Endpipe kit Right OO70 - Left OO70 "Gun Metal Grey" Cod: 816056

To be installed as a kit with 817504 or 817534

aka: Performance sport exhaust for FIAT 500X 1.4T MultiAir

fia500x1

Correct reading of symbols
Note

	With EEC homologation / Compliant to the EEC N°70/157 standard
	Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
	Compatible with the OEM catalytic converter
	For racing use only
	Discontinued Product. Available while stock lasts
	Threaded bung for oxygen sensor provided
	Oval endpipe
	Twin oval endpipe
	Flat oval endpipe
	With certificate of authenticity - Compliance to sound regulations
	With certificate of conformity for classic exhaust design

Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.