Select brand, series, model code and model and choose the Supersprint Exhaust Systems

MASERATI Ghibli S 3.0i V6 (410 Hp) 2013 -> 2017 (with valve)

aka: Performance sport exhaust for MASERATI Ghibli S 3.0i V6

High performance sport exhaust for Maserati Ghibli
Compatible with base V6 basic model, S and S Q4
2013 2013 2014 2015 2016

100% stainless steel Aisi 304

The target of the Supersprint exhaust for the Maserati Ghibli 3.0 V6 turbo was to improve the sound in both open and closed valve mode.
The OEM system is very restrictive and muted in closed mode, and in open mode (sport) tends to be a bit metallic, not very rounded or armonic.

With the new rear mufflers with bypass valves, which have a direct flow design in both modes and are entirely built in stainless steel, with the correct sizing of metal sheets and piping, the sound is much more rounded and meaty in every drving situation, without sacrificing the comfort onboard in the process.

The look is elegant and sporty, but subtle, with 120x80mm tailpipes that are an improved version of the stock items and fill the arches perfectly.

Unlike other systems, like the stock one too, there is no flow restrictions, like a diameter bottleneck or a chamber-type silencer, in closed mode, for optimal performance.

The connection to the valve control system is very easy, just unplug the pneumatic pipes from the OEM mufflers and plug them in the new ones.

The connecting pipe kit is required for fitting the rear exhaust.

We recommend the silenced centre section to people who wants a more involving and sportier sound in open mode but want to keep the OEM-like level of comfort while cruising.
The unsilenced version is for enthusiasts who really wants to hear the V6 singing all the time, but especially in open mode.
Both components include an H-Pipe (a cross-pipe that balances the pressure waves between the two exhaust lines) for performance and sound reasons.

Because this is a "catback" system and it doesn't replace the catalytic converters, there is no electronic problems that cause the Check Engine Light to turn on, and it's not necessary to reprogram the ECU.

With EEC homologation / Compliant to the EEC N°70/157 standard
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converter
For racing use only
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Oval endpipe
Twin oval endpipe
Flat oval endpipe
With certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products. - Internet Partner