Select brand, series, model code and model and choose the Supersprint Exhaust Systems

AUDI S4 Quattro Avant 3.0 TFSi V6 (354 Hp) 2016 -> (with valve)

aka: Performance sport exhaust for Audi S4 B9 with valve

Supersprint is proud to offer a new, full, stainless exhust for the 2018 Audi S4 B9 Quattro, made to replace the entire stock unit from the turbo-back.

The new downpipe is a totally new, breakthrough design, which sets it apart from all of  the current, single-cat downpipes available for the new generation S4/S5 V6 engine, with its twin scroll, single-turbo.

Supersprirnt has ventured into designing a  Twin-Catalytic D/P system, for more volume, much smoother exhaust gas flow and a higher efficiency, for a superior increase in performance.

This same exhaust design is found on the more powerful, twin-turbocharger 2018 RS4 V6 engine.

By designing a perfectly smooth Y-section, placed just downstream of the turbo discharging flange, and using HJS Motorsport twin catalytics, fitting them within the tight confines of the engine's V, the overall volume and the combined cross section of the piping are greater than even the largest, single cat available in the Motorsport Industry.

A beneficial, side effect of this design is the total elimination of the obnoxious whistle noise, genarated by the stock catalytic Y-split sharper section.

The R&L  downpipes are made with oversize tubing, which merge furthe downstream into a single pipe mid-section, built with huge, 80mm tubing.

The perfect, most precise routing of the Supersprint exhausts' main pipe retains a perfectly round shape, all along its entire path.

This is totally opposite to the stock exhaust system, which is heavily crushed in the area of the rear Sport differential; the far-from-ideal, factory exhaust design reduces the section down to a smaller area, and compromises the flow rate, making the resriction effect of the stock catalytic even worse.

Supersprint changes this all, using its massive, 80mm pipe, and then splitting it again just past the differential into two separate, R&L oversize branches, each 65mm.

The Supersprint R&L rear mufflers, with their straight-thru inner core design, offer a dual-sound mode, thanks the the opening / closing flaps, which re-route the exhaust gas path to a silenced section of the canisters, for a tamer note.

The control/select button of the Audi driving management system then lets the sound be changed at will, either manually, or via the pre-set driving modes; exactly as it is done with the factory exhaust.

No modification is needed for installing the Supersprint system.

Tested in house on Supersprint's  Maha, all-wheel braked dyno, the gains in midrange and peak hp are impressive, averaging + 25 Hp.

For even greater gains, we strongly recommend a tune which yelds higher turbo boost pressure, thus taking most advantage of the Supersprint exhausts' higher flowing capability.

Speaking in terms of cross-section and piping volume, the capacity of this full Supersprint exhaust is 450+ Hp, which instantly throws the S4/S5 into the RS4/RS5 performance territory.

As usual, Supersprint developes and builds the individual components in house, including the exclusive, precision machined flaps.

This quality approach guarantees the best fitment, overall finish and durability of our exhaust.
OEM exhaust system

Actual data:
Horsepower 343,8 Hp @ 6030 rpm
Torque 502,5 Nm @ 1620 rpm
Supersprint full exhaust system with valve

Downpipe + metallic catalytic converter (Left Hand Drive / Right Hand Drive)
Front pipe kit right - left (replaces OEM front exhaust)
Centre pipe
Central "Y-Pipe"
Rear exhaust left with valve
Rear exhaust right with valve
Endpipe kit right + left 2 exit 90x70

Actual data:
Horsepower 367,7 Hp @ 6525 rpm
Torque 503,4 Nm @ 2995 rpm
OEM vs Supersprint
With E.E.C. homologationWith E.E.C. homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaustComponent E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converterCompatible with the OEM catalytic converter
For racing use onlyFor racing use only
Discontinued Product. Available while stock lastsDiscontinued Product. Available while stock lasts
Threaded bung for oxygen sensor providedThreaded bung for oxygen sensor provided
Oval endpipeOval endpipe
Twin oval endpipeTwin oval endpipe
Flat oval endpipeFlat oval endpipe
With certificate of authenticity - Compliance to sound regulationsWith certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust designWith certificate of conformity for classic exhaust design - Internet Partner