Select brand, series, model code and model and choose the Supersprint Exhaust Systems

FERRARI 599 GTB Fiorano / HGTE 6.0i V12 (620 Hp) '06 -> '12

aka: Performance sport exhaust for FERRARI 599 Fiorano

fer14
The Supersprint long tube headers and exhaust system for the 2006-2012 Ferrari 599 GTB Fiorano V12 makes huge amounts of Hp and torque.

We can proudly say that this is the most effctive performance mod for this car.

As released from the Maranello Factory with its 630 Hp standard exhaust configuration, the 6.0L V12 Italian engine has the potential to do much better.

In fact, with the 670 Hp Supersprint exhaust upgrade,  the 599 becomes a legitimate contender to the 599 GTO; a truly amazing feature, with the simple bolt-on addition of our system, no other modification required.

Our tubular headers, with their long, oversize diameter R&L twin downpipes, are designed and dyno-tested to provide for the most efficient dynamics, guaranteeing the optimum exhaust gas flow.

The massive increase in torque and in peak hp elevates the 599 onto another level.

The major reduction in weight also helps with the straight line acceleration, starting from the lowest rpm basement on up.

The Supersprint headers make the 599 sound plainly incredible; no other rear-muffler-only exhaust comes even close to it.

Due to the elimination of the redundant, overly restrictive stock catalytics, the voice of the  Ferrari V12 engine is set free, coming from the head exhaust ports straight through the tubular headers system, completely untamed.

This is the exhaust that each and every 599 GTB Fiorano deserves to be driven with.
OEM
Claimed data:
Horsepower 620 Hp @ 7600 rpm
Torque 608 Nm @ 5600 rpm

Actual data:
Horsepower 631 Hp @ 7555 rpm
Torque 635.5 Nm @ 5790 rpm.

Download pdf chart (547Kb)
Supersprint:
- Manifold Right – Left
- Front catalytic converter Rightand Left
- Centre pipes "X - Pipe" Right – Left
- Connecting pipes Right – Left
- Rear exhaust Rightand Left

Actual data:
Horsepower 668,7 Hp @ 7475 rpm
Torque 692,1 Nm @ 4665 rpm.

Download pdf chart (576Kb)
Stock Vs Supersprint
Download pdf chart (394Kb)
With EEC homologation / Compliant to the EEC N°70/157 standard
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converter
For racing use only
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Oval endpipe
Twin oval endpipe
Flat oval endpipe
With certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
Sigla.com - Internet Partner