Select brand, series, model code and model and choose the Supersprint Exhaust Systems

MERCEDES W205 C 400 4-Matic (3.0i V6 Bi-Turbo 333 Hp) 2015 ->

aka: Performance sport exhaust for MERCEDES W205 C 400 4-Matic

merw205c4004m

Supersprint introduces the High Performance, full exhaust system for the 2018 Mercedes W205 C400 4-matic.

This same stainless exhaust also applies to the earlier, 2015 -2017 C400 4-matic models, including the Coupe, the Wagon and the Convertible.

As usual, the key performance component is the R&L Turbo Downpipe kit, built with HJS Motorsport, extremely efficient, low-emission high flowing cats.

Opposite to the stock catalytic system, these Supersprint downpipes reduce the resistence and lower the exhaust gas backpressure to a minuimum , offering the same improvements as the cat-deleting, racetrack-only SS Downpipes.

When mated to the Supersprint front + mid exhaust pipe section, and to the SS R&L rear mufflers, the increase in performance is substantial.

This exhaust has been sized for engine software upgrades, to an upper capacity of 420+ Hp.

Available in several sound configurations, the Supersprint exhaust lets the performance-enhanced C400 remain a comfortable, no-droning daily commuter, or become an agressive, compact sedan.

The Supersprint individual parts, being modular in design, also accept the stock, factory catalytics, for a classic, more conservative, albeit strong-sounding, cat-back configuration.

As always, the installation of the Supersprint exhaust is a simple, straightforward bolt-on job.

The SS R&L rear mufflers accept the oem C400 chrome tail pipe diffusers, as well as the popular styling upgrade to the Mercedes C43 AMG Factory diffuser/tips.

With EEC homologation / Compliant to the EEC N°70/157 standard
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converter
For racing use only
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Oval endpipe
Twin oval endpipe
Flat oval endpipe
With certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
Sigla.com - Internet Partner