Select brand, series, model code and model and choose the Supersprint Exhaust Systems

LAMBORGHINI AVENTADOR Coupè LP 700-4 V12 2011 -> 2016 (with valve)

aka: Performance sport exhaust for LAMBORGHINI AVENTADOR Coupè LP 700-4

Claimed data:
Horsepower 700 Hp @ 8250 rpm
Torque 690 Nm @ 5500 rpm

Actual data:
Horsepower 682,6 Hp @ 7635 rpm
Torque 666,2 Nm @ 5850 rpm
Download pdf chart (184 Kb)
- "Y-Pipe" right with metallic catalytic converter 350602
- "Y-Pipe" left with metallic catalytic converter 350622
- Rear exhaust right - left mit valves (replaces the main catalytic converter) 350604

Actual data:
Horsepower 694 Hp @ 7595 rpm
Torque 677,4 Nm @ 5875 rpm
Download pdf chart (225 Kb)
Stock VS Supersprint
Download pdf chart (209 Kb)



When installing the Supersprint R&L catalytic system, please make sure that the new, oem additional heat shield already is also installed on the car (right side only).

This heat shield comes on all of the Aventador models, starting from 2014 an on.
On the previous models, this was not used.

Unfortunately, there is no informations available to us yet, on which VIN cars are not equipped with the shield, possibly having an insufficient protection against exhaust heat build-up.
Since we have learned that  no official recall has been issued from the Factory yet, it is mandatory to check about this, with your own Lamborghini dealer, first.

The absence of this shield can cause some minor damage to the rubber lines, running in the upper area of the manifold/headers -to- catalytic conjunction (right side only).
Under extreme driving conditions, this type of damage can happen with the stock catalytic, as well as with the Supersprint catalytic in place, although the Supersprint HJS metallic cats provide for a much lower heat retention, in the critical area surrounding the exhaust system, within the engine bay.

Once the additional shield in installed, the proper protection against any potential damage is ensured.

Please see the photos, and double check with your own Lamborghini dealer, wether the recall has been issued in the meantime, and carried out already.
With EEC homologation / Compliant to the EEC N°70/157 standard
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compatible with the OEM catalytic converter
For racing use only
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Oval endpipe
Twin oval endpipe
Flat oval endpipe
With certificate of authenticity - Compliance to sound regulations
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products. - Internet Partner