LAMBORGHINI AVENTADOR Coupè LP 700-4 V12 2011 -> 2016 (with valve)

IMPORTANT NOTICE

When installing the Supersprint R&L catalytic system, please make sure that the new, oem additional heat shield already is also installed on the car (right side only).

This heat shield comes on all of the Aventador models, starting from 2014 an on.
On the previous models, this was not used.

Unfortunately, there is no informations available to us yet, on which VIN cars are not equipped with the shield, possibly having an insufficient protection against exhaust heat build-up.
Since we have learned that  no official recall has been issued from the Factory yet, it is mandatory to check about this, with your own Lamborghini dealer, first.

The absence of this shield can cause some minor damage to the rubber lines, running in the upper area of the manifold/headers -to- catalytic conjunction (right side only).
Under extreme driving conditions, this type of damage can happen with the stock catalytic, as well as with the Supersprint catalytic in place, although the Supersprint HJS metallic cats provide for a much lower heat retention, in the critical area surrounding the exhaust system, within the engine bay.

Once the additional shield in installed, the proper protection against any potential damage is ensured.

Please see the photos, and double check with your own Lamborghini dealer, wether the recall has been issued in the meantime, and carried out already.

Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.