Find the Supersprint exhaust for your car
car brand
Audi S / RS
series
AUDI S3 / RS3
car model
AUDI S3 8P SPORTBACK '08 ->

AUDI S3 8P Sportback QUATTRO 2.0 TFSI '08 ->(Ø76mm system) (with valve)

This Supersprint valve exhaust uses the factory control unit; it is operational upon the install, with no modification required.
Exhaust system
Complete Program
100% Stainless steel system with valve, Oversize Ø76mm
ALTERNATIVE: - Sport exhaust system right - left exit, with valve - Rear bumper must be trimmed to fit
Filter by
Components
Exhaust kit
Headers
Turbo Downpipe
Front Section
Mid Section
Rear Section
Tail pipe
Connecting pipe
Price (€)
394.00 2,123.00
Characteristics
With ECC Homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compliant to the noise regulation 70/157/EEC.
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
Compatible with the OEM catalytic converter
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
With certificate of conformity for classic exhaust design
  • Exhaust system
  • Legend
  • Note

Supersprint 76mm performance exhaust for the Audi S3 8P.

The cat-back, entry version is made by the mid pipe and by the valve rear muffler.

It is also available in the full, performance version, with the simple addition of the Supersprint turbo downpipe.

The saving in weight over the stock exhaust is massive.

Unlike with the conservative, restrictive stock system, the sound switches from a comfort mode, to a straight pipe, non-resonated configuration.

This Supersprint system uses the stock Audi exhaust operation hardware and its vacuum valve management system, which changes the flap position between the open/close modes automatically.

The installation is a simple, bolt-on process, no modification is required.

With ECC Homologation
With ECC Homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compliant to the noise regulation 70/157/EEC. However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
Compliant to the noise regulation 70/157/EEC.
Compatible with the OEM catalytic converter
Compatible with the OEM catalytic converter
Discontinued Product. Available while stock lasts
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Threaded bung for oxygen sensor provided
With certificate of conformity for classic exhaust design
With certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
auda3101vb