Encuentra el escape Supersprint para tu coche
marca de coche
Audi S / RS
modelo
AUDI SQ2
carroceria
AUDI SQ2 QUATTRO 2.0 TFSI (300 CV - models with GPF) 2019 -> 2020

AUDI SQ2 QUATTRO 2.0 TFSI (300 CV - models with GPF) 2019 -> 2020 (con válvula)

Esta válvula de escape Supersprint utiliza la unidad de control de fábrica; está operativa desde el momento de la instalación, sin necesidad de modificaciones.
Sistema de escape
Sistema todo
Performance packages
100% Stainless steel system Oversize Ø76mm - (Deletes GPF)
100% Stainless steel "Cat.-back" system, Oversize Ø76mm
Full kit only
Rear muffler 100% Stainless steel, right - left exit with valves, Oversize Ø76mm - Full kit only
ALTERNATIVE: - Downpipe kit for OEM exhaust system - (Deletes GPF)
Filtrar por
Componentes
Opciones del kit
Colectores
Turbo Downpipe
Front Section
Central
Trasera
Terminales
Conexión
Precio (€)
76,00 4.749,00
Características
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
alias: Escape deportivo para AUDI SQ2 QUATTRO 2.0 with valve
  • Sistema de escape
  • Legenda
  • Advertencia
Supersprint is always a step ahead. We love to be first when it comes to developing performance exhausts for the latest generation sports cars.

Enter the 2019 Audi SQ2 Quattro.

The car has great potential, but it needs some serious help.

The most recent Euro regulations on the emissions are not kind to the performance of the 2019 models.

The SQ2 has a new, horribly restrictive exhaust, which uses a catalytic + GPF (Gasoline Particulate Filter) at the same time.

This oem exhaust really wreaks havoc on the torque and on the peak hp, chocking the engine down so badly, that the Hp rating from the Audi Factory is limited to 300 Hp, from 310 Hp of some previous models (non GPF-equipped), which share the same 2.0 TFSI powerplant.

To make matters worse, based upon the testing done on on our in-house Maha 4x4 dynometer, the GPF-equipped 2.0 TFSI models measure even less power than that, 295 hp only.

In order to getting the performance back to where it should be, we designed a proprietary full system, starting from the turbo back.

This is where the real horsepower and the torque increases are hiding; unlike of the others, Supersprint does not stop at making cosmetic exhausts. We always aim at the horsepower.

Our plain and simple approach is eliminating the stock catalytic and the GPF altogether, replacing them with a straight-through, two-branch Turbo Downpipe, and a set of high flowing, HJS Motorsport twin catalytics, positioned further downstream, farther away from the engine.

With the Supersprint twin-pipe exhaust in place, the power jumps from 295hp to 321hp, no other modification made. A gain of + 26 Hp, from our exhaust alone.

Regardless, this car can do much more, with the simple addition of a software tune.

Thanks to the eliminated restrictions, to the reduced heat soak, and to the easier spooling of the Turbo provided by the Supersprint Performance exhaust, the 2019 Audi SQ2 Quattro can finally reach its full potential of 400 hp.

No less important than the gains, the Supersprint full system guarantees a magnificent sound, with lots of burbling, bangs at pops; yet no droning
 
Con Homologación ECC
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE. 
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
Con certificado de conformidad para diseño de escape clásico
Sistemas de reemplazo de kat para modelos de vehículos OBD (con sensores lambda antes y después del kat).

Estos sistemas solo pueden utilizarse para fines de carrera exclusivamente, junto con las modificaciones del sistema de gestión del motor. Si se usa con una "ECU" estándar, pueden ocurrir fallas de funcionamiento. Todas las modificaciones deben ser realizadas solo por personal calificado, bajo la responsabilidad del propietario del automóvil y a su cargo.

La garantía de súper impresión se limita a la calidad, mano de obra y ajuste correcto al modelo de automóvil previsto para todos los productos de la competencia.
audsq21vbis