Encuentra el escape Supersprint para tu coche
marca de coche
Lamborghini
modelo
LAMBORGHINI AVENTADOR
carroceria
LAMBORGHINI AVENTADOR Coupè LP 750-4 V12 "Superveloce" 2015 -> 2017

LAMBORGHINI AVENTADOR Coupè LP 750-4 V12 "Superveloce" 2015 -> 2017 (con válvula)

Esta válvula de escape Supersprint utiliza la unidad de control de fábrica; está operativa desde el momento de la instalación, sin necesidad de modificaciones.
Sistema de escape
Filtrar por
Componentes
Opciones del kit
Colectores
Turbo Downpipe
Front Section
Central
Trasera
Terminales
Conexión
Precio (€)
2.015,00 6.897,00
Características
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
alias: Escape deportivo para LAMBORGHINI AVENTADOR Coupè LP 750-4 "Superveloce"
  • Sistema de escape
  • Respuestas de los expertos
  • Legenda
  • Advertencia

Supersprint proudly offers a Performance exhaust for the 2015-2017 Lamborghini Aventador LP 750-4 "Superveloce" Coupè / Roadster.

This awesome supercar already has unique, Race-car outstanding features, as the standard headers is a stainless steel, tubular unit, built with the perfectly tuned, long-primary design.

The rest of the oem exhaust has a less-than-ideal components, unfortunately.

In particular, the exhaust gas flow is chocked down by a set of restrictive catalytics, which keep the engine from reaching its full potential.

Supersprint has put a remedy to this, by developing a new, totally free-flowing catalytic exhaust system, which uses two sets of R&L HJS Motorsport, high volume twin cats ( lighter than stock by -2.5 kg).

We have also developed a rear muffler, designing it from the ground up (8 kg less than stock), to complement our cats, with a direct by pass system, and dual-sound mode, operated via a set of vacuum-controlled flaps.

The final result is better torque throughout the entire rpm range, and a gain in peak hp as well.

Also, the sound is overwhelming, as the V12 Lamborghini powerplant breaks its throaty voice free when cruising (flaps closed), and screams at WOT (flaps open), just like a F1 car.

Another positive side effect of this Supersprint full exhaust is, abundant flames shooting out from the large-mouth, center tail pipe.

Built out of premium-grade stainless steel, these Supersprint exhaust components are extremely durable, yet lightweight.

For the Racetrack enthusiasts, we also offer a set of R&L, cat-deleting Y-pipes and a straight tube, non resonated rear section, for an overall saving in weight of -30 Kg.

The installation of the SS system is a straightforward process, as usual, requiring no modifications.

IMPORTANT NOTICE - LAMBORGHINI AVENTADOR HEATSHIELD ISSUE

IMPORTANT NOTICE

When installing the Supersprint R&L catalytic system, please make sure that the new, oem additional heat shield already is also installed on the car (right side only).

This heat shield comes on all of the Aventador models, starting from 2014 an on.
On the previous models, this was not used.

Unfortunately, there is no informations available to us yet, on which VIN cars are not equipped with the shield, possibly having an insufficient protection against exhaust heat build-up.
Since we have learned that  no official recall has been issued from the Factory yet, it is mandatory to check about this, with your own Lamborghini dealer, first.

The absence of this shield can cause some minor damage to the rubber lines, running in the upper area of the manifold/headers -to- catalytic conjunction (right side only).
Under extreme driving conditions, this type of damage can happen with the stock catalytic, as well as with the Supersprint catalytic in place, although the Supersprint HJS metallic cats provide for a much lower heat retention, in the critical area surrounding the exhaust system, within the engine bay.

Once the additional shield in installed, the proper protection against any potential damage is ensured.

Please see the photos, and double check with your own Lamborghini dealer, wether the recall has been issued in the meantime, and carried out already.
Con Homologación ECC
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE. 
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
Con certificado de conformidad para diseño de escape clásico
Sistemas de reemplazo de kat para modelos de vehículos OBD (con sensores lambda antes y después del kat).

Estos sistemas solo pueden utilizarse para fines de carrera exclusivamente, junto con las modificaciones del sistema de gestión del motor. Si se usa con una "ECU" estándar, pueden ocurrir fallas de funcionamiento. Todas las modificaciones deben ser realizadas solo por personal calificado, bajo la responsabilidad del propietario del automóvil y a su cargo.

La garantía de súper impresión se limita a la calidad, mano de obra y ajuste correcto al modelo de automóvil previsto para todos los productos de la competencia.
lamave5