Encuentra el escape Supersprint para tu coche
marca de coche
Porsche
modelo
PORSCHE 911
carroceria
997.2 Series GT3 / GT3 RS

PORSCHE 997 GT3 RS 3.8i (450 CV) 2009 -> 2011

Sistema de escape
Sistema todo
100% Stainless steel system, Oversize 2 x Ø70mm -> 2 x Ø65mm - Full kit only
100% Stainless steel system, for the Stock rear muffler - (Deletes the Right & Left side mufflers)
ALTERNATIVA:Kit anulador silenciosos Derecho-Izquierdo
ALTERNATIVA:SUPERSPRINT silencioso (Anula silenciosos traseros Derecho-Izquierdo)
Filtrar por
Componentes
Opciones del kit
Colectores
Turbo Downpipe
Front Section
Central
Trasera
Terminales
Conexión
Precio (€)
198,00 4.085,00
Características
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
alias: Escape deportivo para PORSCHE 911 997.2 GT3 RS
  • Sistema de escape
  • Imágenes
  • Legenda
  • Advertencia
Supersprint is proud to offer the new race exhaust for the 2009-2011 Porsche 911 GT3 RS.

It is made by long tube headers, HJS Motorsport, large volume Race catalytics and a muffler with integrated, built-in Helmoltz-resonator chamber.

The extra-long primary tube design, the step-diameter, and the tuned, overall dimensioning, a trademark of Supersprint, make these headers the undisputed champion in performance, with substantial gains both in peak hp and in low and midrange rpm torque.

On the 911 GT3, a car made for the racetrack, most of the commonly known exhaust principles and ideas do not apply.

Our R&D crew has worked strenuously, with designing, building, testing and scrapping many prototype exhausts, until we finally came up with the perfect system.
 The muffler design sports a built-in Helmoltz resonator chamber, which tames the db level down to meet the FIA regulations, yet it does not hamper nor reduces the exhaust flow rate by the slightest amount.
No need for funky hp-killer, nor other awful tail pipe add-ons.
Our system is built to be installed, ready to go, as is.

Performance-wise, the Supersprint long tube, step diameter primary headers and the HJS Motorsport, 100 cpsi large-volume cats are the perfect complement to the SS muffler; that is exactly what the high-revving engine of the GT3 needs.

Short headers designs only have a limited potential, regardless of their primary diameter; they add little or no power over the factory exhaust.

Instead, long tube headers are the ideal exhaust design.

Nowadays, this concept seems to have  become the latest craze among the exhaust makers and the Porsche specialists, worldwide.

We can proudly say, Supersprint has invented and pioneered the concept, independently.
We learned our lesson and made it work, way before the others have embraced it.

On each of the GT3 versions that followed, the Porsche Factory has gone through a steady, continuous development process on the engine, by increasing displacement, going to direct-fuel injection, bumping up compression ratio, moving the redline to a higher rpm, altering cam timing, redesigning the intake system and fine tuning the fuel & spark advance mapping to enhance and complement the changes.

All the while, the stock exhaust system has remained unaltered, putting a damp on the true performance potential.

Porsche has continuously refined the original concept of the GT3 engine, getting to increase the baseline, stock performance, step-by-step. A very clever approach, which delivered brilliant results throughout the years.

But there is one sore spot, unfortunately; the redundant, overkill exhaust system is still the same restrictive design introduced on the 997 GT3  3.6L.

Here at Supersprint in Italy, we never stopped in doing our homework, upgrading and improving our original design to larger diameter primaries, to wider inlet ports on the flanges, and adopting other subtle, yet significant dimensional features.

In the era of the Turbocharged supercars, the Porsche GT3 may be the last of the great, N/A high-revving race cars.
After all these years, Supersprint is proud to still offer the best exhaust system for this legendary model.
Con Homologación ECC
Con Homologación ECC
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Componente Homologación C.E.E. válida sólo cuando se monta en el escape trasero específico homologado Supersprint.
Conforme a la normativa sobre ruido 70/157/CEE. 
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la normativa sobre ruido 70/157/CEE.
No obstante, es posible que el modelo o tipo de motor específico no esté incluido en la lista oficial de vehículos para los que se ha emitido este escape.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Conforme a la norma sobre emisiones sonoras permitidas nº 70/157/CEE.
Compatible con el catalizador OEM
Compatible con el catalizador OEM
Producto descatalogado. Disponible hasta fin de existencias
Producto descatalogado. Disponible hasta fin de existencias
Tapón roscado para el sensor de oxígeno suministrado
Tapón roscado para el sensor de oxígeno suministrado
Con certificado de conformidad para diseño de escape clásico
Con certificado de conformidad para diseño de escape clásico
Sistemas de reemplazo de kat para modelos de vehículos OBD (con sensores lambda antes y después del kat).

Estos sistemas solo pueden utilizarse para fines de carrera exclusivamente, junto con las modificaciones del sistema de gestión del motor. Si se usa con una "ECU" estándar, pueden ocurrir fallas de funcionamiento. Todas las modificaciones deben ser realizadas solo por personal calificado, bajo la responsabilidad del propietario del automóvil y a su cargo.

La garantía de súper impresión se limita a la calidad, mano de obra y ajuste correcto al modelo de automóvil previsto para todos los productos de la competencia.
po99711